Product upgrade! By upgrading our RGB flexible strip lighting from 12V to 24V, you now have the ability to control multiple runs of the product from a single remote control.
> Self-adhesive 3M tape backing allows for quick and simple installation.
> 7 preset colours of the RGB (cool white, violet, yellow, cyan, green, red and blue).
> The perfect product to create mood lighting, either set to one of the 7 colours, or select the slow or rapid colour change option.
> Male and female ends on the strip allow you to create the length required.
> The strip can be cut to length, scissor marks on the product mark where suitable to cut (every 162mm).
> Use the RGB remote control to create the effect or choose the colour that is perfect for you at the touch of a dial.
> All you need to install is an adequate amount of flexible strips, driver connection lead(s) – one per run of strips, driver and a RGB control.
> Run a maximum length of 10m from one driver.
> When using the RGB remote control, each new run of RGB strip lighting requires a driver and a receiver, however multiple receivers can now be controlled via one remote control.
> We have upgraded this range from 12V to 24V to allow multiple receivers to be controlled from a single remote control.