Call Us On 01202 735403
Cart 0
Sensio - LED HD Cabinet Switch 12V/24V


Sensio - LED HD Cabinet Switch 12V/24V


This attractive IR sensor has 3 functions; use under cabinets as a swipe on/off switch or to dim the connected lights. Alternatively, mount inside a kitchen cabinet or wardrobe to act as a door sensor to internal lights.

Please note this .1 code product has been upgraded to now include a dimming function and to accommodate products with higher wattages.

Recommended Location

Key points:

 > Can be used with 12V products with a max wattage of 24W and 24V products with a max wattage of 48W (without an integrated sensor).

> Works as an on/off switch for these fittings.

> Three functions of the sensor:
- Mount inside a cabinet - open door to activate .
- Mount under cabinet - lights are activated when a hand passes the sensor for less than 1 second.
- Mount under cabinet - dim the lights when hand is held under the sensor for more than 1 second.

> 5cm detection range, so unwanted detection is not a problem.

> Can be surface mounted or recessed into a pelmet.

> Plug and play, and no additional wiring is required by an electrician. 

> The products is pre-set to the Mono-stable function (non- dimming mode).

> Infrared sensor for use with LED lighting.

> 1 x JB4 Distribution Block supplied with each sensor.

Share this Product

More from this collection